HELICAL BEVEL GEAR REDUCER MOTOVARIO B SERIES

HELICAL BEVEL GEAR REDUCER MOTOVARIO B SERIES

HELICAL BEVEL GEAR REDUCERS – CAST IRON
B – IB – PB – CB

Kandungan teknologi B-Series pengecil gigi memungkinkan untuk rasio kinerja / umur yang luar biasa. Unit-unit gigi yang sangat serbaguna yang berhasil digunakan dalam sejumlah besar aplikasi industri dan sipil. unit B-Series menawarkan nilai yang sangat baik untuk uang dan output rasio torsi / berat, terutama mengingat bahwa mereka perlu servis sangat terbatas.

Tersedia dalam besi cor dari ukuran 063-163.

Sertifikasi Tersedia: ATEX 2GD / 3GD

b142 300x169 - HELICAL BEVEL GEAR REDUCER MOTOVARIO B SERIESb063sc 300x169 - HELICAL BEVEL GEAR REDUCER MOTOVARIO B SERIESb063uc 300x169 - HELICAL BEVEL GEAR REDUCER MOTOVARIO B SERIESb063uc flangia  300x169 - HELICAL BEVEL GEAR REDUCER MOTOVARIO B SERIESb143 300x169 - HELICAL BEVEL GEAR REDUCER MOTOVARIO B SERIES
b143 motore cam2 300x169 - HELICAL BEVEL GEAR REDUCER MOTOVARIO B SERIEScb063 motore cam2 300x169 - HELICAL BEVEL GEAR REDUCER MOTOVARIO B SERIESb143 motore cam2 2 300x169 - HELICAL BEVEL GEAR REDUCER MOTOVARIO B SERIESib063 cam2 300x169 - HELICAL BEVEL GEAR REDUCER MOTOVARIO B SERIESb143 cam2 300x169 - HELICAL BEVEL GEAR REDUCER MOTOVARIO B SERIES

Characteristics:

  • Sizes: 060-080-100-125-140-150-160
  • Available versions: B – fitted for motor coupling, IB – with input shaft, CB – with compact motor, PB – fitted for motor coupling with flexible joint
  • Casing with feet FC, flange SC and universal UC
  • Power up to 90 kW
  • Gears hardened and tempered with shaved or ground profile
  • Gearing with 3 reduction stages
  • Gleason spiral bevel gear pairs with run-in profile, mounted as second reduction stage for a higher resistancee
  • Reduction ratios between 5,71 and 187,24
  • Torque max 13.000 Nm and admissible radial loads max 80.000 N
  • High-strength casings optimized with FEM analysis and input and output flanges of grey cast-iron G200 to ensure top level performances and high reliability
  • Load capacity calculated and verified according to ISO 6336 and AGMA 2001
  • Painted with RAL 5010 blue epoxy-polyester powder
  • Accessories: torque arm, output flange, output shaft, shrink disk, backstop device, protection cover kit, viton oil seals, reinforced output, assembly/disassembly kit

HELICAL BEVEL GEAR REDUCERS – ALUMINIUM
BA – IBA – CBA

ba52 cam2 1 300x169 - HELICAL BEVEL GEAR REDUCER MOTOVARIO B SERIESba52 motore cam2 300x169 - HELICAL BEVEL GEAR REDUCER MOTOVARIO B SERIESba53 cam2 300x169 - HELICAL BEVEL GEAR REDUCER MOTOVARIO B SERIESba53 motore cam2 300x169 - HELICAL BEVEL GEAR REDUCER MOTOVARIO B SERIES
cba52 motore cam2 300x169 - HELICAL BEVEL GEAR REDUCER MOTOVARIO B SERIEScba53 motore cam2 300x169 - HELICAL BEVEL GEAR REDUCER MOTOVARIO B SERIESiba52 cam2 300x169 - HELICAL BEVEL GEAR REDUCER MOTOVARIO B SERIEScba53 motore cam2 1 300x169 - HELICAL BEVEL GEAR REDUCER MOTOVARIO B SERIES

Characteristics:

  • Sizes: A40-A50-A70
  • Available versions: BA – fitted for motor coupling, IBA – with input shaft, CBA – with compact motor
  • Universal casing
  • Power up to 5,5 Kw
  • Gears hardened and tempered with shaved or ground profile
  • Gearing with  2 and 3 reduction stages
  • Hypoid bevel gears for size A40 and A50, gleason bevel gear pairs for size A70, all with run-in profile
  • Reduction ratios between 7,62 and 442,76
  • Torque max 450 Nm and admissible radial loads max 10.000 N
  • Casing in die-cast aluminium alloy
  • Load capacity calculated and verified according to ISO 6336 and AGMA 2001
  • Painted with RAL 5010 blue epoxy-polyester powder
  • Accessories: torque arm, output flange, output shaft, shrink disk, viton oil seals

Leave a Reply

Your email address will not be published. Required fields are marked *